Daily maintenance of the Sewage treatment screen

1. During the operation, if there is any fiber impurity blocking the rake tooth chain, it should be cleaned in time to avoid affecting the normal operation of the equipment.

2. The garbage hanging on the discharge board should be cleaned regularly according to the amount of garbage.

3. During the operation, if the motor runs normally but the rake tooth chain does not run, it means that the overload causes the safety pin to be cut off, and the power supply must be cut off to replace the overload safety pin.

4. The maintenance and overhaul of the reducer should be carried out according to the "Reducer Operation Manual".

5. Add butter to bearings and chains every month.

 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here